Ceremonial Garment (Plastic Age)
by awatkins, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
100% printable scale armor. No metal rings necessary.
I reverse-engineered scale armor through research so that plastic plates and rings could be printed. I am currently creating a scale armor tunic for an individual study in my studio art major at UMW. My blog on the project: http://awatkins.umwblogs.org/category/methods/3d-printing/
If you're curious about scale armor, Wikipedia has an informative article http://en.wikipedia.org/wiki/Scale_armour
Each scale needs two rings to link together.
I find it useful to multiply my build platform http://www.makerbot.com/tutorials/skeinforgemultiply/ and print two scales and four rings alternately.
I set the pair of scales to print at 5 infill at accelerated speeds on the Replicator and the rings to print at 50 infill at non-accelerated speeds. In this configuration each print takes about 20 minutes.
A note about the rings: on the two printers I've used, the ring comes out pretty tight, I like this, it keeps the scales together well; however, it does require popping the ring's spiral out while it's warm and bendy. If it's too tough to do by hand, it's easy to sneak a small pair of scissors in there to loosen the stuck area.
http://www.youtube.com/watch?v=1dKD2n-kvVo The Ring Lord scale maille tutorial is where I learned how it should look.
I have a post on the design process on my independent study blog: http://awatkins.umwblogs.org/methods/positive-and-negative-z/
Tools & Utilities Apps
Repair, slice, or enhance this Thing
Ceremonial Garment (Plastic Age) by awatkins is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving awatkins a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure awatkins would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).