This camera mount is intended to be used with the Ox FPV Thug Classic 230-H quadcopter frame. The camera mount has been designed to be mounted on the Thug Classic 230-H camera surround piece, using the M3 screws included with the frame. This camera mount is also designed to be used with the Samsung Gear 360 camera; however, it can be used with any camera that can be mounted with a 1/4″ - 20 UNC fastener.
The camera platform is oriented with a 40° tilt. The mount is elevated in order to ensure that clearance exists between a top-mounted battery and the camera/lens assembly.
A 1/4" - 20 UNC fastener with a length of 1/2" is required in order to retain a Samsung Gear 360 camera to this mount.
Screw holes are slightly tight; however, they will accommodate 3 mm metal screws, as screwing the fasteners into the holes will create the appropriate threads within the plastic.
Any plastic should be suitable for printing this camera mount. Initial testing was performed with TPU (Shore 95A hardness).