Loading
Enely

Park bench set H0 scale

by Enely Jul 11, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Is this the right scale for HO ?

It looks ok since the table height would be 694mm which sounds plausible. I can't verify with my own files right now unfortunately. I'm on vacation for a couple of weeks and will be without a computer for another 9 days or so. If I don't get back after that, feel free to send me a reminder.

The scale isn't right when it comes to the thickness of the benches but if made thinner it will be difficult to print. However, the furniture doesn't look too thick among other HO stuff. My outdoor / yard furniture comes in two versions where one is more accurate.

Comments deleted.

Did not work. Too much overhang

Hm try very few supports for the overhang maybe. Otherwise try with a thicker layer height. I tried with the thinnest and it didn't look as good as when I used a slightly thicker thread. These were my settings:

First Layer Height: 0,2
Layer Height: 0,12 (called High in flashprint)
Print Speed: 50 mm/s
Travel Speed: 70 mm/s

Added this information also to the item description to help others since you are not the first to have this problem. Hope you have better luck if you try it again!

At times even the very simple design which anyone can do, can still look ok :)