Print it out and defend Echo Base from the Imperials invading Hoth!
I felt like doing a blaster, so here it is, designed more so after the appearance in Battlefront 2.
There are round holes running through the central pieces that can be joined together by half inch rods to keep everything lined up, the top rod should measure about 22.5 inches and the lower 19.75 inches.
This is a large and support heavy project. Pieces 1-4, Scope Housing and the Iron Sight require support. Be sure to print 2 O-Rings and 3 Scope Buttons. All of the STLs are in the orientation I printed them in, let me know if you find a better orientation/how you printed them, so everyone's prints will improve!
Happy printing, Rebel Scum!