Since my mirror holder broke off on the last ride with my Seadoo Speedster 150, I decided to print a new one. It is attached to the waketower with 4x M6x35 Allen screws. The Waketow bar has a diameter of 47.6mm and the arm for the mirror is approx. 330mm long.
the support material is contained in the arm and not in the clamp.
With the head, on the other hand, support material prevents falling over
If you like it ;)
I ground the parts with grain size 180 and then with grain size 320. The dust is well blown off and then primed with RAL 9010. Then re-sanded with 320 and varnished again with RAL 9010 and after drying the final coat again with clear varnish.