Adapter bracket to install a MKS Gen L or BIQU BIGTREETECH SKR with original 50mm fan into the CR-10 case. Mounts using existing screws from the melzi board, 50mm fan will require 20mm m3's. Board mounted on adapter with m3 6mm computer screws.
Please note: You will lose SD card support with the MKS using the original screen. Alternative is to purchase a reprap screen or use the SKR instead with onboard SD using the cutout template courtesy of P_C_R
Template to cut the hole for USB port included, place on outside and mark the hole with a scribe or place tape underneath and mark with a pen. I drilled a pilot hole and used a nibbler tool to make it rectangular and a file to finish it off and touched up the exposed metal with some black touch-up paint.
- Updated title and description to include the SKR board & linked SKR template (Thanks P_C_R)
- Updated fan description.
- Added note about SD card with MKS.
- Added link to nibbler tool.
Support may be needed for the fan holder, rest isn't required