These are the hinge prints used to enclose my Z-603s. this will be attached to an acrylic panel to close up the front of the printer, see also the handle.
Note: for one set you need;
2 x Hinge female
1 x Hinge male short
1 x Hinge male long
Parts required for front panel closures (all links are from ebay, i have no affiliation to any of these sellers!);
1 x Acrylic plates cut to size (tbc)
8 x M3 x 16 Socket cap screws (https://bit.ly/2OilNBB)
8 x M3 nylock Nuts (https://bit.ly/2AasYst) or what i am doing use a nutserts!
1 x Handle inner (thing:3019994)
1 x Handle outer (thing:3019994)
Can be printed finer but just wanted to fast print, i printed with 2 shells.