Fireplace for dollhouse 1:12 scale.
Printable model composed of:
Fireplace (in 3 pieces: base, body and hood)
Optional woodshed (in 2 pieces: base and body)
STL files are already positioned to print in the correct position.
Up in fireplace_hood.stl and head down in the remaining 4.
The model was designed for a dollhouse scale 1:12 (usual for dollhouses)
Adjust with the slicing / printing software to your needs.
Below are other scales also used in dollhouses:
- 1:16 Scale = print at 75%
- 1:18 Scale = print at 66.6%
- 1:24 Scale = print at 50%
Paint if desired. I have used acrylics.
It is planned to use pieces of filament (1.75mm diam) as connectors between the various parts.
(Center manually, or re-tapping to 2mm if other printing scales are used.)
Glue. I have used specific glue for rigid plastics, but glue for plastic or super glue models can work as well.
Optionally, glue the wood group to the fireplace group. I have preferred to keep 2 separate groups.