Drill press with parkside drill adapter. It has universal platform where can be mounted any other adapter.
1x M8 nut is put into the piece (bottom_control_part.stl) during print
1 hard wood board, 100x150mmx20mm
8x wood screw
1x spring cca 73x17mm (from old bycicle pump)
2x M8 rod, length 330mm (they are drilled in the wood board)
1x M8 threaded rod, length 340mm
1x M6 threaded rod, length 130mm
1x M6 threaded rod, length 140mm
2x 608 bearing
2x M8 lock nut
2x M8 nut (one is put in the part during print - bottom_control_part.stl)
1x M8 acorn nut (inside the top_move_wheel.stl)
7x M6 nut.
1x M6 acorn nut
16x M4 nut
2x M4 screw, length 15mm
8x M4 screw, length 20mm
2x M4 screw, length 25mm
2x M4 screw, length 50mm
Printed from ABS, but can by printed from PLA.