Easy to print and assembly Glide Bait. 100% working! No epoxy needed!
I worked really long on this lure, so please leave a like and a make!!!
There are 4 different Heads and 2 different Fin parts. You will figure it out ;)
I also designed Line Thru Head versions. You find them under remix.
For assembly instructions look here and scroll down: https://www.thingiverse.com/thing:3024248
2 outer walls
0.1 - 0.2mm layer height
no top and bottom layers (only important for S3D users)
Print orientation like on pic 2!!!
I allways drop one pellet of silica gel with tweezers into every air chamber while printing. So i have a rattle sound and i notice when there is water inside. (then there is no rattle sound anymore)
But with my printer and settings it is waterproof without epoxy.
Changed the fin part, so the hole is longer and the screw doesn´t need to be trimmed that much. Still needs to be trimmed a bit. (picture is from the swimbait)