A footrest/ toilet stool to elevate your feet and move your pelvis into a squatting position while going number 2... If you haven't seen the unicorn video, go watch it!
Rough measurements: WxHxD = 500 mm x 180 mm x 280 mm
Slightly higher in front (toes) than the back (heels). Designed to slide under a wall mounted toilet when not used.
Designed to be laser cut from 6mm material.
If you work with the dxf files:
You need the top once, and the sides and bars twice each.
If you work with pdf:
In the pdf all parts are placed already, within a 300x600 mm workspace. You can just send each of the 2 pages to the cutter.
I cut it from 6 millimeter beech plywood. Finished the wood after and sanding it smooth with mahogany-brown oil laqueur.
Assembled it with the help of some express wood glue at the joints.
Created in Fusion 360. Exported surfaces to DXF. And to PDF via Illustrator to add the poop emoji.
(I ended up not scanning the poop emoji because the laser which supports grayscale engraving best was busy...)