This is a modular hobby servo Linear Actuator joint assembly. It is part of the Tiny_CNC_Collection of parts designed to facilitate entry into robot building fun!
All parts print without supports or post processing! Everything can be assembled with a screwdriver and single type of screw. See photos for assembly directions.
Specs: Repeatable no load motion control = +/- 0.076mm (.003") up to 100g before position control affected. Travel limit is 80mm (3.14").
**All information regarding this project is on this page:
Required Hardware Servo: https://amzn.to/2ndSaVB
Recommended Material: https://amzn.to/2MmNOGA
*Can be printed in any material as long as all parts are the same material.
Also a blog article about how to design parts for assembly: https://engineerdog.com/2018/05/08/design-for-assembly-tips-building-a-better-3d-printed-linear-actuator/
*Note 1: Included are STEP files so you can further modify these to your needs. Please enjoy these files and use them as you wish while respecting the sharing license.
**Note 2: If you do print these out snap a pic and share your make! I'd love to see how these designs are being put to use.
PLEASE NOTE PRINT SETTINGS ARE CRITICAL TO ACHIEVE STATED PERFORMANCE.
-Print with 3 perimeters all sides top & bottom. (0.4mm nozzle dia)
-Parts must be printed in the orientation they appear when you load them!