This is the original Maker Hammer known from a video by Youtuber Ivan Miranda!
The original was printed in Printament Metal Bronze, Mirandament (the original Red PLA of Ivan Miranda), Printament PET-G and Printament Hard Flex. Choose your desired Material for individual Hardness of the Hammers flat sides and for balanced weight.
The file Stiel_Neu2.should be printed vertically to make it look better and StielStab.stl should be printed laying flat to provide more strenght. (you might have to scale the StielStab.stl to down to 94% to make it fit, the tolerances are really tight).
Use 40-50% infill and 3 outer shells for best results.
you can find the settings for each material at www.aprintapro.com
do not forget to follow Ivan Miranda on Youtube and consider following me at http://youtube.com/mayermakes for more 3d printing fun.
you can find all the settings for each material at www.aprintapro.com