My daughter sleeps up on the top bunk, and uses the space below as her "office". We've installed some lights in there with duct tape, but really needed something better to hold them in. Behold these awesome little clips, with optional hooks, that fit perfectly around the bed slats of the Ikea Kura bunk bed.
Printed in PLA, you can push one side on and just bend the other side over for a firm attachment. My 4-year-old has no problem putting them on and taking them off, so they are mildly child-friendly too. Use the model with the little hook to string up toys, LED holiday lights, artwork, or anything you can think of!
Complete OpenSCAD file is included, with parameters at the top you can use to adjust or resize the clip as needed. You can make really thick clips for holding large wires or heavier hanging items.
It prints on its side, making it nice and strong. Recommend PLA for its flexibility.
If you find that the fit is snug after printing (it wasn't for us), just put it on a board and slide it back and forth quickly for a minute. The friction will wear down the PLA and you'll have a looser fit.
Created in OpenSCAD, with full comments and parameters at the top for adjusting the model if needed. Use the parameters to make the exact clip you want. To remove the hook, just erase the bottom part of the code that draws the hook.