Windows Mixed Reality Hanging Wall Mount

by Brandonmh83 Aug 10, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Why the angle on the mounting surface? Did you just want your controllers angled upwards or would they not fit otherwise?

I'm pretty late on this but just wanna say thank you very much for the model! I now see the need for the angle, these holders have been perfect!

The design on these is really good. When the controller is in the holder, it isn't going any where. You could get the controller only 30% in and between gravity and the slight angle on it it will still slide in safe and sound.
I printed mine 20% infill at .2mm on ender 3, the strength and finish seems great

Thanks for this, printed mine on Ender 3 at 40mm, 0.2mm in white PLA with 40% infill with great results, fitment is amazing.

A version without screw holes for people who use double sided tape would be nice (3M automotive worked for me bonding with flat surface on furniture after thorough cleaning both surfaces with isopropyl alcohol and covering every milimiter with tape and letting it cure for a while) - no need for holes in walls/furniture.

Everything with kids needs screws or lag bolts

I don't doubt that, but there is always an option to mount these out of reach. Also, these will break even at 100% infill PLA before the screw mounts fail.