Designed for 5mm arms on a delta printer, to mount dampener springs between the arms.
Eliminates backlash and chatter from the balljoints.
Includes a notch to keep the spring loop in place and to prevent creaking from the springs.
Print 12 of these for a full set of 6 springs.
Print in PETG for best results!
PETG has just enough flex to let the mount snap onto the arm, and it grips enough to keep the springs where you put them.
Settings that are getting me string-free prints:
240C/85C glass bed with gluestick
20mm/s print, 120mm/s travel
Costing on, 0.8mm
Retraction on, 6.5mm
Z Hop off