Designed as a test-piece for those purchasing the fully rendered version (as pictured), this set is also a fully functional Wallhalla shelf. These pieces are fitted with a recess for a round 25mm base (far and away the most common), though the shelf sets include configurations for 20mm-70mm bases (with adapters for square bases being available) as well as non-recessed versions.
I'll be collecting free Wallhalla parts here, and if you're interested in buying full sets, you can find them here on our storefront. Our Patreon supporters also get access to these designs, along with all of our other products.
For those of you supporting us (or thinking about supporting us) on Patreon, our patrons get special access to our store releases as they come out (not to mention license options to sell printed versions of our designs).
3D Printing Wallhalla: Modular Miniature Display Shelves
Please keep in mind that this is a general guideline for use while printing Wallhalla: Modular Miniature Display Shelves and your experience may vary. However, this is a good place to start.
1.) Make sure your 3D printer is in good repair and well calibrated.
2.) Use your preferred slicing program and set the profile as follows: No support or raft is needed for either ABS or PLA.
A.) ABS Printing using a .4mm, nozzle: Nozzle Temperature: 220 C, Build Platform Temperature: 110 C using Kapton tape for bed adhesion, Infill: 10%, Layer Height: .2mm, Number of Shells: 3.
B.) PLA Printing using a .4mm nozzle: Nozzle Temperature 190 C, Build Platform Temperature: 0 C using 3M original blue painter's tap for bed adhesion, Infill: 10%, Layer Height: .2mm, Number of Shells: 3.
3.) If the previous settings fail, double check your printer calibration, then adjust the nozzle temperature up 5 degrees and try again. Repeat up to 4 times (filament temperature requirements vary by manufacturer and color).
4.) If you use a slicer that is preset into categories similar to 'Prototype', 'Normal', and Excellent, use the 'Normal' setting. This will most likely be adequate to print functional and attractive Wallhalla: Modular Miniature Display Shelves.
Thank you for your support, we look forward to seeing your creations displayed on your walls using Wallhalla: Modular Miniature Display Shelves! Happy printing!