Swiss-Knife Key Ring / Key Holder
by azraelho, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a Key Ring / Key Holder that is designed like a Swiss knife.
I've made a key holder for different type of key to hold inside while it can be turn out by the outside detail. (You can edit the profile using the STEP file if it does not fit.)
Also, I've made the pin to be a tight fit with the holes on the cover so that it can be fit without screw. But if your printer can not print it very tight, you can use washer screw to tight them together. Or you can print the washer and tight them by normal M2.6 x 6mm screws.
I've upload a STEP file also. If you want to insert more keys, you can extend the pin in CAD also
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Swiss-Knife Key Ring / Key Holder by azraelho is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving azraelho a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure azraelho would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).