After testing this gimbal on some of my planes i realized that in some planes where you fix it inside the canopy (like my Hangar 9 FPV) you may need a shorter tilt arm because your camera lense may touch the window on full pan. so I made a shorter-in-length version of the tilt arm. In another try on my Ranger I realised that sometimes I like to see the nose of the plane in FPV (specially on manual mode) so I decided to make another version of tilt arm which is shorter in height!
I added these two optional tilt arms to the original design in V3 with 3 optional tilt arms. stl file hase been added. if you dont need the extra arms, you may split the file in your slicer and delete the unwanted options.
Some of the users had dificaulties in fixing their 9 gr servos caused by some variations in external dimensions in different brands of servos. I enlarged the servo pockets for easier mountage.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.