I have been converting all my Computers over to SSD's - as they run at least 300% faster, and got a couple of128G mSATA SSD's on eBay for under $40 - I know they are pretty low capacity, but work for Laptops without 1000's of video's, and you can't beat the price.
My adapters are approx 50mm x 80mm, and couldn't be attached to a Computer easily - so I designed this adapter to avoid those nasty smoke generating accidents Murphy seems to delight in causing :-)
Printed in ABS - but anything should do - the screw holes are slightly undersize, so the mounting screws tap into the plastic fine.
As the bottom is way too thin for screws - I just added some Hot Glue to hold the SSD in place.
Printed with a 0.3mm nozzle - you may need to scale yours slightly for a different nozzle size.