Logitech C310 M12x0.5 Lens Mount
by Pomeroyb, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I'm hacking a new lens onto my Logitech C310 webcam, but the standard lens mount has an M8x0.5 thread. This part allows me to use the more standard M12x0.5 thread.
LensMount_TightFit has a slightly smaller hole, which makes the lens a bit less wiggly.
This prints pretty well on a Replicator 2. Depending on the tolerances of your printer, you may have better or worse luck.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Logitech C310 M12x0.5 Lens Mount by Pomeroyb is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Pomeroyb a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Pomeroyb would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).