Logitech C310 M12x0.5 Lens Mount
by Pomeroyb, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I'm hacking a new lens onto my Logitech C310 webcam, but the standard lens mount has an M8x0.5 thread. This part allows me to use the more standard M12x0.5 thread.
LensMount_TightFit has a slightly smaller hole, which makes the lens a bit less wiggly.
This prints pretty well on a Replicator 2. Depending on the tolerances of your printer, you may have better or worse luck.
Edit, personalize, or revise this Thing
Logitech C310 M12x0.5 Lens Mount by Pomeroyb is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Pomeroyb a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Pomeroyb would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).