This is a Remix adapted for the Anet A8-M of the bottom supports for the "Hulk" Frame Brace created by Leo_N found here: https://www.thingiverse.com/thing:2189694/files
The Anet A8-M has i slightly larger frame than the regular Anet A8 due to the dual extruders. These bottom supports is made to fit the stock vertical arms for the "Hulk" frame brace found in the link above. All other necessary information about the design can be found there as well.
The design of this frame brace is really good and makes a huge difference for the frame stability. A huge thanks to Leo_N for making the original design!
Only PLA is recommended for these braces.
Use 0.8mm wall thickness.
You might need to use "Rafts" to avoid warping depending on your printer setup.
Rotate the upper braces by 25° to fit the build plate and make sure you set your Slicer to 100% scale.