Airsoft M4 stock

by ohman74 Aug 23, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Printing thebuttstock piece at the moment. Rest is done. IMHO one of the neatest looking 3d printed stocks and seems like it can hold a decent battery aswell. Is the stock meant to be in one position or is it collapsible/elongatible when using the set screw to set the stock length?
One thing I would change on the mount: Make the hole a bit smaller in diameter (Maybe to 5mm, thats the screw diameter usually), and the part where the screw would tighten the mount a bit thicker. Currently it seems that the stock tube washer needs to be used.

Hi and thanks for the feedback!

I'm happy you like it :)

The stock holds a decent sized battery, it is meant to be in one position, set screw is only there to make sure you don't manage to lose the buttplate while playing.

I did design the mount to be used with the stock tube washer to account for differences between different manufacturers. Should be fairly easy to remix it and make the hole smaller if you want to use it without the washer though.