Simple wallmount for bikes. This one was designed to mount my ebike (with mounted battery) with a total weight of about 50 pounds.
big mountainbike tires will also fit in the base plates. My tires has a width of about 70 mm.
No Supports needed
Print a pair of the base plate (filename: bike_wallmount_baseplate_v5.stl)
Both files can be printed with a minimum layer height of 0.3 mm.
To get very strength parts, i´ve printed the two base plates with an infill of 75 % and the top-anchor with 100 % infill.
last but not least, you have to print a fixation for the brake(s), otherwise the bike can roll of the base plates too easily. I simply used a printable cable tie, which you can/have to customize for you needs ( you can get and customize it here: https://www.thingiverse.com/thing:58776 )
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.