Loading
HanCheol

Tronxy X5S Corner Pulley Guide

by HanCheol Aug 25, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Hi Just printed a set of these off in PETG and they came out great. A couple of things that might get them perfect might be to shift the corner mounting hole either to near the ouside corner, with a corresponding hole through from top to bottom, or shift it towards it's adjacent mounting hole by around 3mm. It currently fouls on the frame assembly screw head which sits almost directly beneath it. It's enough that I can't get the T-nut to turn and lock into place. Also as mentioned by Jonzy, could you reduce the depth of the locating spigots on the underside by around 1mm. This will allow them to clear the frame assembly screw heads also.
Great design otherwise.

The guide tabs hit the screw heads of the frame joiners, needed to snip bits off

Just printed a set off to test, 4 walls .5 nozzle petg, I think they are bomb proof , super solid! Thought about a carriage with same mod to stop strain on those bolts as well ?

Hi there

Excellent work, these parts are so strong, it's perfect ! Thanks :)