Fortnite Chest - closer to game graphics

by blecheimer Aug 26, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Do you need support to print this? I have tried to print it twice and both times the support seemed to be causing problems

You only need support for the lid. All other parts do not require any support.
There are a lot of small parts. It can make sense to print those small parts with a brim, if your printer requires it. For quality prints of the chest it is important that your printer is well calibrated and the parts have a good adhesion to the printbed. The slower you print the better is the result. When I print the chest with my settings, it takes about 25 hours to print all parts.

How to put everything together? Do you gotta screw errthing together or glue it?

As there are no screws, you have to glue it.

Hey, I'd love to get in contact with you about using this model as a part of a project I'm working on. Do you have a contact e-mail?

I have sent you a PN.

Printed everything at 2x size (200%) with PLA. Looks great, would recommend the box to be >25% infil, it's a little soft at 20% as is. Thanks a lot!

Comments deleted.

I'm currently printing this at 150% for my daughter as a fun little box.
.15 layer and 15% infill.

The Base seems strong enough, currently printing the lid.

I am curious how everything fits at 150% - please show some pictures when it is finished.

These updates are awesome and the model is amazing! Thank you for sharing this. In the future, when you need reference materials, you can go into the "Playground" game mode. It's a private match where you have the whole map to yourself!

Thank you for your comment!
I found out that I could have used playground after I had the pictures I needed... ;)