I wanted to create the Hammer of Thor but then with some real weight to it. So it needed a bit of a update to give it more strength.
I re-modelled the "handle_1" so a brass rod of 2cm could go through the complete length.
I also made a hole in "hammer_bodyB" so the rod could connect to the top of the hammer.
I made 4x 1cm holes through the length of the hammer. and two lips that connect the two B parts.
Then I modified the "hammer_bodyC" and "hammer_bodyD" part by connecting them together and also made 4x 1cm holes through them. 4 1cm aluminium rods will hold the hammer together. Then I cut 40 sheets of lead and glued them to the end of the hammer. Giving the total hammer 4 kg of weight.
This a remake of:
Thor Hammer Mjolnir (Easy prints) https://www.thingiverse.com/thing:2961715
And this the original:
My hammer stand can be found here:
Thor Hammer Mjolnir Stand