New FuzNuz design out, this one is a completely new design for a standard sized bridle rack.
Key features include:
A strong dip shaped design to hold all sizes of bridles securely on the rack.
Four holes for size #8 wood screws with countersinks for a secure flush mounting on wood.
Can also be bolted to magnets for trailer applications.
A holding peg for carrying light items. It is recommended to not place any object weighing over 3 lbs (1.5 kg) on the holding peg.
A name plate for a label that measures 1.5 inches by 0.25 inches.
4 inch diameter compact size to fit in most installations.
Rapid print time, mine took 3 hours to print at 0.4 mm layer height and 15% fill density, At higher fill densities it may be stronger, but the 15% already is sturdier than our metal bridle racks.
No support material is required. Meaning no clean up or polishing, just print and mount.
Here is a quick guide of links to my other FuzNuz horse equipment items:
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.