Loading
ilikeatingcrayons

Duet 2 Maestro Case (3030, 2020) Duet Maestro

by ilikeatingcrayons Aug 31, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

I am using this case on my HEVO and the Duet Maestro MCU is running just under 70C, I know this is under max temp but would prefer the board to run cooler. Is there any chance of you designing a snap on fan housing (40mm) to add extra cooling to your case design?

70C seems unexpectedly high, my currents are 1400, 1400, 800, 1300 (A,B,E,Z) with the case mounted vertically and I've never exceeded 46C on the MCU without active cooling. Are you sure you calibrated the MCU temperature correctly?

My case is mounted horizontally. I did not know there was a procedure to calibrate the MCU temperature. Printer is printing now so next time I let it cool down to room temperature I will do the calibration. Thanks for the info.

It would be really nice if you 12864 lid had another cutout in front of the 10 pin connector for the PanelDue display. With the ribbon cable the PanelDue sd card can be used to print via the SD card. I already printed it and routed the cable to the first LCD12864 cutout but would be nicer for people in the future with a cutout right in front of the plug.

Thanks. I already printed the LCD12864 version and can move the cable and leave some slack to get it through the closest slot. I will keep this one for next time I need a 3030 Maestro case. I appreciate the quick response.