Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!

CR-10 FANG OEM remixed + ABL on Plate + M3-Nut-holes + 40mm or 5015 Fang

by rgrae Sep 2, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Have you ever thought about making a version of this fang for a Chimera / Cyclops hot end? If you could share you 3d files, I could try to help you out.

The Chimera / Cyclops is about 50x30x30 (LxWxH) so I think a little tweak on this would make it a perfect fit.

What is the probe offset ?

please have a look at the "Thing Files" there is a txt-file with the offsets

The V2-FANG-oz-fang-40mm_open_bowden.stl file is odd. I positioned it so that the fan housing sits flat on the bed but your model is not flat there. I had to cut a small fraction off in order for it to be perfectly flat. Other than that little thing, great job!

Thanks for your response! I'll have a look at this problem the next few days

Was für schrauben braucht man

M3 Schrauben 12 oder 16mm. Bei 12mm geht es sich aber bei Sicherheitsmuttern nur ganz knapp aus. Also bei Sicherheitsmuttern lieber 16mm und ggf. ablängen. Für den 5015 habe ich eine M4 25mm genommen und abgelängt

Comments deleted.

Will this work with the Ender 3 from Creality?

Ender 3 and CR10s have the same hotend, so it should work. I also read that people used the Fang from ozfunghi, I remixed from, on Ender 3. But I can't test this because I don't have one. The best is you print the carriage plate first and test it. If it fits, the rest should fit also.