Hello everyone, this is the Grow-JR. Designed to turn your basic jar into a plant pot. The drain holes at the bottom make sure all the excess water is able to leave the soil. It will fit jars with a top diameter of +/- 77,5mm and a lid with six "holds". Also note that the jar should be deep enough ( i used a jar, with a height of 140 mm ). Every time you empty a jar, your house gets a little greener ;) ! Enjoy!
This is a prototype/work in progress, if you like it, let me know!
2.0 update: More beautiful round shapes, bigger volume & smaller drain holes in the side. (the roots will thank you ;) )
Pick one ;)
This was printed quickly as an example. With 1,0mm nozzle and at 3000mm/min. Use lower print speeds for better quality.