Do you as me want to be able to take the bottle at the bottom of the pile without it collapsing?
Then I have the solutions for you! :)
Print my modular beer stand!
Do you want it to take up 10%, 20%, or maybe even 100% of the the fridge?
You build it as high and wide as you like! :)
What are you waiting for?
Start printing today!
If you like this model, please post your make!
But if you love this model, buy me a beer ;)
No supports needed.
Print all parts except the assemblyclips lying down.
You are advised to print many clips at the same time, it takes some!
Use "Concentric" pattern for stronger parts.
Print as many front and back hexagons you want the stand to have.
Assemble all hexagons with the clips.
(Use a drop of superglue on the clips if you do not want to be able to take it apart.)
Carefully attach the spacer in the back hexagons with a hammer.
- Use the hammer to gently snap the front in place. Put a pice of wood in between the hammer and the front to even the pressure and protect the plastic from breaking.
Do not hammer one spacer to the bottom at once, go from one to another round and round until all is in place.