A remix of pmoews Pinecone Finial into a Pinecone Pen/Pencil Holder!
It could even be used as a small planter!
There are two files included. The original version is what I printed (pictured above) while the Deeper version has a smaller, deeper area to accommodate larger pencils/pens/brushes/etc. Both should print fine.
STL's made from the original using Fusion 360. Looks and feels substantial. Hard to knock over. I recommend using 3 perimeter walls and at least 4 top layers. Orient with the flat bottom down and print without supports.
Printed on an M3D Promega using White, M3D ABS-R (PETG composite).
.2mm layer height
Sliced using Simplify3D.
M3D ABS-R (PETG composite)