A DIY wasteboard for the Nomad 883 Pro CNC. We also provide a wasteboard with a grid of mounting holes. This is ideal for mounting the included vices.
Designed with VRL-Studio and the VCSG Plugin.
How to make and assemble the board:
- Either print or mill the board. Note that the board with extra mounting holes needs to be milled from both sides.
- Push nuts (M6) into the back of the wasteboard (see hexagonal holes).
- Vices can be printed with most 3d printers (tested with Ultimaker 3 Extended at 0.2mm)
Depending on your setup and exact dimensions of the M6 nuts it might be necessary to slightly increase the size of the hexagonal holes. The uploaded wasteboard files work for me (milling). For 3d printing it probably makes sense to print a small part of the board first to check that everything fits as expected.
The vices need an M6 nut too. Just push them from the top of the vice into the nut hole. The uploaded STL/STEP files are tested with an Ultimaker 3 Extended @0.2mm.
VRL-Studio Project (Visual Programming Interface)
VRL-Studio Project (Code Editor)