Jabba the Hutt (Small & Life Size)

by MightyJabba Sep 16, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Thanks for showing this project. Have seen it on YouTube. This shows what's really possible. I thought it would collapse without some fiber material on the inside but it didn't.
The printing time is crazy.
I hope you make some more crazy big things.

Now you need a Salacious B. Crumb. Can you share the Rancor skull?

i have a windows 7 32 bit so i cant use meshmixer or fusion 360 to cut up the model, can you cut it up to make it fit a 230mm by 230mm by 250mm for my ender 3 to make it as big as yours, i would really appreciate it

I'm glad you're interested in the project, but I'm very reluctant to take on the job of cutting up the model myself. It has the potential to be a very big job to accommodate everyone's printers, and if my experience is any indication, it will also be necessary to make some adjustments/changes as you are printing. For example, one piece I cut up ended up being slightly too big to fit on the bed, even though it seemed like it would be fine, and another piece ended up having to be cut in half because it became obvious that it would print much better than way. In other words, you will probably need to be able to cut files yourself at some point during the course of the project. Are there really no options for cutting models up on 32-bit windows? Ideally you would start with a smaller model and try that out, because this is literally one of the hardest projects you can take on with a 3D printer, and you'll need some experience.

Thank you for sharing this! Your youtube channel is great!

curious of how many spools did you need up going through in the end?

For the life-size one, I’m guessing around 40. It is just a hollow shell

yeah I figured hallow but was curious on the number of spools. I have a CR-10s 5 but haven't done alot of life size options yet