Loading
PrettySmallThings

1:48 Queen Anne Chair

by PrettySmallThings Sep 23, 2012
Download All Files

Thing Apps Enabled

Please Login to Comment

Hi what settings did you have to print that quality mine came out stringy and not as good using play will abs be better

Hey,
you're doing great stuff. my wife loves that chair and I'm going to print the whole set.
thanks.

I am struggling to print this using the makerbot2 software. At the factory settings for speed and temp, it stopped extruding the legs and stopped completely. I turned the heat up a bit (245) and slowed the extruder speed to 80 and it helped a bit. Is there any advice as to how I can fix this problem?

Having not previously run this print on my Rep 2 - I gave it a try tonight. Worked fine on the medium setting. Some general advice: Printing the split version is much easier than the whole version. Try a different roll of filament - I have a few on hand that just don't handle intense retraction well. Also, switch to medium or low if you haven't already already. You'll generally get fewer errors than the high setting.

I Made one, Good job Kacie, Keep It Awesome ~

I made one :)  Gosh, this thing qualifies as an absolute TORTURE test of the replicator.   
Sliced and printed at 75 micron (0.075mm).  It took about 30 minutes to print, using the SailFish accelerated firmware and RepG 039.PrettySmallThings, you rock.  Great model.

In know all about breakage in miniature printing. Alas, it is the price we pay.... Seriously, well done! I can totally use these.

That is insanely tiny! Thanks for the tip about Extra Restart Distance, I didn't know about that setting and I was running into that problem.