Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!

1:200 Tanks and Vehicles - Pack 2

by m_bergman, published

1:200 Tanks and Vehicles - Pack 2 by m_bergman Apr 25, 2014


Liked By

View All

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Thing Statistics

55449Views 15556Downloads Found in Vehicles


1:200 World War 2 1944-45 wargaming set. PACK 2
SEE ALSO PACK 1: http://www.thingiverse.com/thing:232248
SEE ALSO PACK 3: http://www.thingiverse.com/thing:539511
SEE ALSO PACK 4: http://www.thingiverse.com/thing:1138822

1:200 WWI Tanks: http://www.thingiverse.com/thing:440171
1-100 Tanks:http://www.thingiverse.com/thing:769137

Something to draw in my lunch breaks.
Designed to be printed on UP! Plus in ABS.
Support is essential.
Part 2 now uploaded. Please note that both Pack2 and Pack2-part2 are required to get the full content.



Drawn in Solidworks 2012 & 2013
Designed to be printed on UP! Plus in ABS.
Support is essential.
Settings used: 0.15mm layers, vent open, loose fill, 4 layer surface, supports 3mm^2 x 80 degrees
If you print these for use with Flames of War, scale to 187%
Part 2 now uploaded. Please note that both Pack2 and Pack2-part2 are required to get the full content.
pack2-part2-stl contains all the simple version stls, some extra variant stls, some corrected stls, and some new vehicles.
pack2-part2-x_t contains the new and corrected x_ts, plus any missing from part1.
Unzip the files into the same location that you unzipped Pack2.
3 vehicles will be overwritten: Su-85, SU-100, SU-122. ( A minor fix to the hull.)
Pack 2 part 2:
M3A3 Stuart
M3A3 Stuart Recce
M5 Stuart
M5 Stuart (full mudguards)
M5A1 Stuart
M5A1 Stuart (full mudguards)
M5A1 (late) Stuart
M5A1 (late) Stuart (full mudguards)
M5 Stuart Recce
M5 Stuart Recce (full mudguards)
M8 HMC (full mudguards)
M7 Priest (early) (3 piece transmission, M3 suspension)
M7 Priest (mid) (3 piece transmission)
M7 Priest (late) (3 piece transmission)
M7 Priest (late) (cast transmission)
M7B1 (M4A3 hull, full mudguards)
Sdkfz 234-1
Sdkfz 234-2 Puma
Sdkfz 234-3 (75mm L24)
Sdkfz 234-4 (Pak 40)
Opel Maultier
Opel Maultier (covered)
Pack 2:

M4A1 early
M4A1-76W with .5 mg
GMC CCKW-252 SWB (Artillery tractor, short wheelbase version)
GMC CCKW-252 SWB with winch
GMC CCKW-253 LWB (General service long wheelbase version)
GMC CCKW-253 LWB with winch
M2A1 halftrack
M3A1 halftrack
M3A1 halftrack with winch
M16 AA halftrack
Lend Lease:
(Many of these also for US and Commonwealth use.)
M4A2-76W (Russian use only, essentially.)
M5 halftrack with roller
M5 halftrack with winch
M5A1 halftrack with roller
M5A1 halftrack with winch
M9A1 halftrack with roller (Artillery tractor version)
M9A1 halftrack with winch
M3A1 scout car
SU-57 halftrack (T48 GMC, Russian use only)
Studebaker US-6
Studebaker Katyusha
M17 AA halftrack (Use M16 turret)
BA-64B armoured car
T-70 light tank
SU-76 early
SU-76 late
T-34-76 hex turret early
T-34-76 hex turret late
T-34-85 early
T-34-85 'spider' style wheels
IS-2 early ("broken nose")
IS-2 late
IS-3 (also alternate turret with DSHK mg)
Kubelwagen (covered)
Opel Blitz
Opel Blitz (covered)
The new Sherman parts can of course be mixed and matched with the existing Pack 1 components to produce most Sherman variants. (Excepting HVSS and 105mm versions which will be in Pack 3...)

More from Vehicles

view more

All Apps

Auto-magically prepare your 3D models for 3D printing. A cloud based 3D models Preparing and Healing solution for 3D Printing, MakePrintable provides features for model repairing, wall thickness...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

With 3D Slash, you can edit 3d models like a stonecutter. A unique interface: as fun as a building game! The perfect tool for non-designers and children to create in 3D.

App Info Launch App

Quickly Scale, Mirror or Cut your 3D Models

App Info Launch App

Awesome packs thank you!

But where can I find the BM Rocket Launcher? Katjuscha?

It would be great if you add more stuff, like modern AntiAir and Artillery (like Wargame Red Dragon), prefer in 1:100 - i need this stuff :-P


A Studebaker Katyusha is in this pack

Thanks mate!

The rest of the IS series coming? IS4, 5, 6, 7, 10?
Amazing job, btw. LOVE it.

When printing the turrets for the Tiger II, the hole in the tank is round, but the turret's pole (or whatever) is elliptical in shape. I printed a couple just to make sure. Should I print supports under it to keep it from sagging?

Thanks and these are awesome!

Do you need support for the Hetzer?

Could you try your hand at making 1:200 WW2 Aircraft and/or ships? I think it would be awesome to have a huge military battalion of Land Vehicles, Airplanes and Ships.

There are some landing craft in Pack 3. Anything beyond a LCT-6 is totally unfeasable, in my opinion. For example, a Liberty Ship is 441 feet long - that scales to 672mm in 1:200. Even a Flower class corvette is 312mm long.
Not really interested in making a ship in 7 or 8 large pieces. There are enough tanks to keep me going for a long while to come, especially if I delve into post-war items.

in the movie 'Kellys heros' a US halftrack has a large stubby cannon, mortar or rocket launcher mounted on top center looks like a 6 or 8 inch bore. I dont see this version in the packs.

Mar 2, 2015 - Modified Mar 2, 2015
m_bergman - in reply to n2ri

105mm HMC T19 - only 324 built in 1942, very few left by 1944 to fight in France.
But, as always, I'll include it at some point.

Feb 27, 2015 - Modified Feb 27, 2015

Great work really !

I tried to print the Hetzer model at original 1:200 scale with a Markerbot Replicator 2X but I came across a few issues :

  • details (parts of tracks, wheels) are sometimes missing
  • the barrel seems to thin too get printed

Please can someone share printing settings to get the best of these stunning models ? Many thanks :-)

I print them sitting on their tracks, which ensures that the gun barrel prints nicely and strong. (That's why the gun barrels are drawn with a flat underside - too small to be obtrusive, but gives a lot more surface area during printing.)
Support is required. This is automatic in the UP software, so I'm afraid I can't help with that.
0.15mm or 0.2mm z axis layers should work fine.
If printed in the suggested-above orientation, all features are designed to be big enough to print.

There should be my mistake : I printed it standing on its back, barrel up as this is how it appears when loaded in Makerbot desktop software.

Thank you for the quick help. I really appreciate it :-)

just a small request I would like to make.

can you make a stl file of just the wheels laid flat in sets of 4 each;
duel rears off 6x6 trucks, single front wheels off 6x6 trucks, and single wheels off car/jeep?
I have a few failed prints where just a wheel or 2 got messed up printing.. thanks!

your first pack was awesome and now i find out you have a second pack AND WW1 pack... you sir just got a new follower.

Excellent modeling sir. The detail on these is great!

If only these could be made in 1/32 scale, I'd be able to make the best old fashioned Marx battleground playset ever! How hard would that be?

Just scale the model up by 6.25 when you go to slice it. Most slicers have the option to scale like that... The math works out so that a 1/32nd scale model is 6.25 times larger than a 1/200th scale model. After that the question is whether the model fits on your printer or not.

can you make a cargo/troop tarp cover (like other trucks have) for the GMC 6x6 open so we can make a closed version for short and long wb? also this truck came in 2 more versions 1 recovery crane service, and 1 maint repair shop with large box with fold out ext roofs each side for in field vehicle mechanics providing shelter from sun/rain while repairing vehicles

Thank you so much!

Can you make it an stl file?

In the "Thing Files" tab above is a file called bergman-tanks-pack2-stl.zip, which contains all of the .stl files in one zip archive.
All you need to do is download and unzip that file.
There's no way I'm going to upload 50+ .stl and 50+ .x_t one by one...

Thanks for all of your hard work. Could you please include a US Stuart light tank and a Priest? Keep up the good work.

A flippin mazing. many thanks