Filament holder with bearings that uses the original bracket on Ender 3.
You will need a 16 cm long M8 threadbar.
2 pcs 608Z bearings.
2 pcs M8 nylon lock nuts.
And 2 M8 washers.
For the "Optional_thread_guide.stl" you will need some glue.
I use Loctite Super Glue Precision.
Assembly the whole thing except for the thread guide. As the last step glue it in place. Make sure to leave some room between the thread guide and the filament holder.
Put a pice of paper or somethong between the parts when you glue it in place.
If you like this model, please post your make!
But if you love this model, buy me a coffee ;)
Use support material in the center when you print "Filament_holder.stl".
No support on the other parts.