Snapmaker Laser CNC Align and Fix jig (v.2)

by carl0sim0lina Sep 26, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

hi carl0sim0lina,
Can you scale down the length of the rails to fit within a dust shield so the screw mount points are using the inner set of mounts?
I would like to use this https://www.thingiverse.com/thing:2805671 and have your clamp rails on the inward mounting point.

scrap fence

Hi, MrFen!
I've just uploaded all the parts individually.
Hope your adjusts work better than expected.
Please let me know when your design is ready, because I'm postponing the CNC use due to the machine's location (I can't handle the dirt it will make).
Thank you!

Hi, MrFen!
I'll upload all the pieces individually, so you can tinker them more precisely that I've could, hehehehe...
I believe it will work greatly with this fence. Great idea!

Thanks, now the dimensions are correct.

Made one, dimensions are not correct, can't screw it on the board. It's not possible to move the clamps...

Wasted 2hours and filament printing this, sorry but it's not worth it. Needs improvement!

Hi, again!
Just fixed the little joint piece.
Thanks again for your feedback!


Just saw the mistake I've made. Thank you for your feedback. I'll fix the little joint piece, so the screws' holes will fit into place without the need to print the rails again.

Only 2h ? Mine took almost 7h to print... I've printed it in high quality because of the v-slot rails' orientation. If it could be printed horizontally, the clamps would slide a lot smoothly. It's a tight fit, so the first pass will put some resistance, but the thinner the layers, lesser is the resistance.

Again, thanks a lot for your feedback!

All the best!