Printable switch cover to prevent DaLunchbox v2 from turning on in your backpack!
The lock version covers the OFF side to make extra sure the switch does not move (but you need to remove the plug to turn it on).
Can be printed in any material you want, but we recommend PLA or TPU.
You can use 15-20% infill depending on the type of infill used. We prefer to use triangular for everything, but rectilinear is fine and you can probably lower the density to 15% without any issues.
Make sure the gaps between the infill lines is less than 5mm and it will be fine.
All LunchboxFPV parts are designed for the same infill settings.