These are brackets designed to support the potentiometers of the NANDbender noisemaker board, which otherwise bend back easily.
The NANDbender noisemaker board was designed by Pinoaffe & Benadski for the 2018 revspace analog synth workshop. Design files for the board can be found at https://revspace.nl/NANDbender
Print flat on bed
Brace top is a mirror image of brace bottom. A mirrored STL is provided.
You could mirror the STL in your slicer software as well.
Top layers: 3
Bottom layers: 3
Wall lines : 4
- 4x M3x10 Bolt
- 4x M3 Nut
- 4x M3 Washer