Loading
SynJa

Ender 3 X Axis GoPro Mount

by SynJa Oct 3, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Great design!
Are you able to make a little bit longer version with a little bit thinner 'right' joint to fit on Geeetech A10/A20 ? The geeetech has the X endstop where the joint should be placed. We have to fit the cam holder between the plastic box and the endstop (about 1.5mm of gap)

Unfortunately I don't have an A10/A20 and I wouldn't want to guess as to how much it would fit. I often do repeated iterations and test prints on my models before releasing them. It often is not as simple as a hard measurement when it comes to a functional 3d print. It shouldn't be very difficult to open the model in Fusion 360 and modify it to your needs.

Hi,
I also I have to broke the piece in order to fit in the box.

I have to broke the piece in order to fit in the box. I guess is ok to say it's "fits"

If you're referring to the 2 parallel extrusions it's supposed to snap apart. It allows the arm some give while still remaining snug once it's affixed. It only needs to "break" b/c the arm prints in its collapsed state, touching the parallel support.