I've designed this Rhino bust so it can print with or without eyes (so the eyes could be printed separately in a different color). I've also done it with and without built in supports. This means there are four models to give you all combinations of the options:
• Rhino Bust (with eyes, no supports)
• Rhino Bust (with eyes and supports)
• Rhino Bust (no eyes or supports)
• Rhino Bust (no eyes, with supports)
If you print the eyes separate from the bust... one has an L on it (against the print bed) to indicate that is the left eye. The eyes slide easily into the bust.
This can be hung firmly to the wall using the "Wall Mount for Low-Poly Rhino Bust.stl" file. It has room for two screws, but I've found that using the top screw hole only is sufficient. I've also added a small slot, so the Rhino bust can also be hung with just a nail if you prefer.