This is a canopy to go with the EOS1/2 adjustable camera mount for whoop style quads.
It allows you to adjust the angle without getting in the way of the camera but it also gives a little more protection to the camera than the stock canopy
I recommend printing it at 0.1mm layer height so that the top and curves turn out better.
I printed it with support.
If printing for TPU print at 20mm/s and set the support angle to 50 or even 48 so it adds more support on the back slope, if not the TPU moves and the print does not come out well.
Note: the black canopy is TPU so proof that it is possible but takes a bit of fiddling and lots of support due to the fact that TPU flexes around when printing.
Here is an adjustable mount for the stock Z02 camera.
I do not own a Beta6/75x, I made these for the community, please consider tipping to help me to continue making things for the community.
Shout out to Nick Burns for his help in testing these designs to make sure they fit/work, please subscribe to his youtube channel, it is full of great information and he is the fastest indoor pilot I have seen on youtube.
Update: Added a new thicker version, original is a single perimeter, the thicker is two perimeter walls