3 easy to print parts to make a sunshade for your Dalunchbox v2.
You can also print only the short version that fits inside the Lunchbox when using only 1 large insert.
Make sure your printer is able to print precise edges, the main part is made to clip on the lip of the screen cover.
You can use 15-20% infill depending on the type of infill used. We prefer to use triangular for everything, but rectilinear is fine and you can probably lower the density to 15% without any issues.
Make sure the gaps between the infill lines is less than 5mm and it will be fine.
All LunchboxFPV parts are designed for the same infill settings.