A tested mount and CFD optimised duct for V6 & Volcano hotends on the Creality X carriage. Part cooling outlets are height adjustable, as is the BL Touch mount.
All parts can be printed without support. I'd suggest 4 walls and 1.6mm thickness top and bottom.
EZABL offset: X = 43.3, Y = 0.
BLTouch offset: X =34.6, Y = 0
6/10/18: EZABL 18mm bracket added.
6/11/18: Parts modified to utilise M3 nuts instead of helicoils.
30/12/18: Major update with enhanced CFD optimised part cooling in a more compact format, now including a duct option for Volcano hotends.
Requires 2off M3 x 30 countersunk bolts to clamp heatsink.
1off M3 x 25 countersunk bolt to secure 5015 fan.
Duct and ABL mount both require 1off M3 x 15 socket head bolt.
Each bolt threads into a M3 nut.
6/3/19: A couple of tweaks to the mount and clamp to accommodate changes to the X carriage made by Creality. The pockets on the rear of the mount are now 4.5mm deep, and the clamp is secured using 2 x M3 x 30mm cap head bolts rather than the countersunk ones.
Technology Outlet PETG
All parts print without supports. Some fan cooling required for bridging on the duct. Print the duct in the orientation shown in the last picture.