Miniature layer height: 0.1 or below (this miniature is small so 0.04 is recommended)
Platform layer height: 0.1
Print speed: 20 mm/s
Infill: print with enough infill or your miniature won't be strong enough or may be damaged by some sort of printing issue. Mine was printed completely solid.
Don't use rafts for the platform, miniature with or without rafts.
PS: Mind that printing with high resolution(such as 0.04 mm) will have some problems, such as ghosting, and some walls/shells won't print properly, so have that in mind.(You can use a tool such as a soldering iron to fix it)
Mine was printed at 0.04 mm with silver(gray) filament but there were some problems so I painted it all white with acrylic paint.
Designed using Desktop Hero 3D.
Credits go to:
backer71 (Muscled Arm Left)
backer71 (Muscled Arm Right)
backer71 (Male Head)
backer71 (Soldier Helmet)
for making the assets
And Andrew for designing this awesome application!