This camera mount is for use with the Solid Bed Mount set produced by https://www.th3dstudio.com/product/cr-10solidmounts and a Raspi camera v2. The idea is to lower the lens so that the nozzle is in view more so than it is using the TH3D mount.
It could also be used with the standard (stock) spring mounts BUT the height of the boss would need decreasing to suit the distance between the bed and the baseplate so I have included a modified arm with a boss height of 16mm (StockSpringArm) and a StockSpringCase to suit.
It is fitted to the bed using the stock screw and thumbwheel. The camera case is fitted to the arm using the nut & bolt provided in the Bed Mount Kit (M3*26mm.)
Demonstration video : https://youtu.be/NUXMDtbxdUc. Timelapse via Octoprint using the "on Z change" setting.
My prototypes were printed with PLA and seem to be surviving but longterm it might be better that the arm, at least, is printed in ABS.
NOTE. The CameraCaseTop.stl should be turned over in your slicer.
Use supports for the arm(s)