Is it an Ultimaker? Is it a Zortrax? It's a CLM-300!
This is a project started in december 2017 with Generoso Savino and Doru Simion. Some special thanks to Alessandro Virdis for the belts lock model provided. Every single piece made this a beautiful work of different minds ;)
It is a 3D printer with 300x300x300 mm printing area, powered by a Lerdge-S with Cr-2020 or Duplicator 6 extruders.
The budget for this build is around 500 euro (less than 100 euro for the frame only).
The listing here is in italian but i think you are smart enough to use a translator ;)
REMEMBER!!!: This is a work in progres so can be missing parts or basic problems. If you need more instructions or some help try to ask on the comments or reach the italian facebook group here: https://www.facebook.com/groups/clm300/ (ITA)
Attenzione: Work in progress!!!
I link forniti sono da considerarsi solo come indicativi. Potrebbero scadere o non essere più convenienti.
Se avete dubbi seguite il gruppo Telegram qui: https://t.me/clm300 (ITA)
Profilati e barre
Estruso 3030 da 45 cm 8-12 pz
Estruso 3030 da 65 cm 4 pz
Barre diametro 12 da 59 cm 2 pz
Barre diametro 8 da 51 cm 4 pz
Barre diametro 6 da 40.5 cm 4 pz https://cnc-store.eu/
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.